KUTAI AUTO START CONTROL UNIT FOR DENYO GENERATOR # EC22

• Auto Start Control Unit for DENYO Generator
• Auto Start Control Unit designed for DENYO generators. It can accept signals from a remote switch or an automatic transfer switch (ATS) to automatically start or stop the generator. EC-22 is controlled by a microprocessor for full digital processing. reliable performance.
• Works with both 12V and 24V generators.

**All manufacturer names and numbers are used for reference purpose only and do not imply that any part is the product of these manufacturer.

Features

Specifications

• DC Power Input: Voltage 9 to 36 Vdc
• AC Power Input: Voltage 10 to 300 Vac , Frequency 50/60 Hz
• Static Power Dissipation: Less than 3 W, 0 W at standby mode
• Accessory Signal Output (ACC): 10 Amp @ 12/24 Vdc
• Start Signal Output (START) : 30 Amp @ 12/24 Vdc
• Pre-heat Signal Output (PRE-HEAT) : 30 Amp @ 12/24 Vdc
• Common Alarm Output (FAIL) : 3 Amp @ 12/24 Vdc
• P2 terminal Output : 5 Amp @ 12/24 Vdc
• AR/O terminal Output : 5 Amp @ 12/24 Vdc

Time Delay Settings and Adjustments

• Engine Shutdown Timer (STOP) : 1 to 20 seconds
• Engine Pre-Heat Timer (PRE_HEAT) : 1 to 10 seconds
• Engine Cranking Timer (START) : 1 to 20seconds

LED Status Indicators

• Indicator LED (REMOTE) : External Remote start input signal
• Indicator LED (FAIL) : No AC voltage output when engine is running / Engine Failure Shutdown / Engine Start Failure

Environment

• Operating Temperature : -20 to +60 °C
• Storage Temperature : -20 to +80 °C
• Relative Humidity :max. 95%
• Vibration : 5.0 Gs @ 60 Hz

Physical Specifications

• Dimensions: 162.0 (L) x 112.0 (W) x 33.0 (H) mm / 6.38 (L) x 4.41 (W) x 1.30 (H) inch
• Weight: 430 g +/-2%, 0.95 lb +/-2%