KUTAI Diesel Generator Governor Controller No Magnetic Speed Pickup Needed

Generator Governor Controller No Magnetic Speed Pickup Needed

EG4016 uses the detected frequency of the input voltage to control generator engine speed so the magnetic speed pickup is not required. Applicable to all types of generator engines and also supports Cummins high-gain engine types (PT PUMP).
*Newly add START FUEL VR to adjust Maximum Starting Fuel for smoke suppression.

• Senses generator frequency, no magnetic pickup (MPU) is required
• Applicable to all types of gas and diesel generator engines
• Supports External, Internal, and PT Pump mounted types actuators
• SPEED, GAIN, DIF potentiometers for easy adjustment
• Idle & Speed Controls through the connection of an external potentiometer
• Selectable functions of Engine Speed Ramping or Immediate Start
• Loss Sensing, Overspeed, and actuator short circuit protections
• Applicable for 12V/24V operating voltage with reverse polarity protections
• Internal electromagnetic interference filtering
• Moisture, vibration, and rust protected, epoxy encapsulated electronics

Specifications

• Operating Voltage: 10 to 32 Vdc
• Reverse Voltage Protection: Max. -50 Vdc
• Output Current: Continuous 9A, Max. 15A for 10 seconds
• Sensing Input Voltage Range: 1 to 600 Vac
• Sensing Frequency Range: 5 to 100 Hz
• EMI Suppression: Internal electromagnetic interference filtering
• Steady State Speed Band: +/-0.25% (with stable load)
• Idle Speed Frequency: 25 Hz @ 50 Hz / 30 Hz @ 60 Hz
• Temperature Drift Frequency Range: 0.1 Hz @ -40 to +80 °C
• External Frequency Control: +/-2 Hz 5K ohms 1 watt potentiometer
• Static Power Dissipation: Min. 120 mA @ 12 Vdc, Min. 60 mA @ 24 Vdc

     
                                                 OFF                             ON
SW1 Actuator types    External or Internal mount    PT PUMP mount
SW2 Ramp time         10 seconds ramp time           Immediate start
SW3 Frequency          60 Hz                                     50 Hz

Governor Controls

• START FUEL: Maximum starting fuel adjustment
• SPEED: 50 Hz : 45 – 55 Hz, 60 Hz : 55 – 65 Hz
• DIF: PID differential adjustment
• GAIN: PID actuator output gain adjustment

Environment

• Operating Temperature: -40 to +80 °C
• Storage Temperature: -40 to +85 °C
• Relative Humidity: Max. 95%
• Vibration: 5.0 Gs @ 60 Hz

Physical Specifications

• Dimensions: 162.0 (L) x 112.0 (W) x 43.0 (H) mm / 6.38 (L) x 4.40 (W) x 1.69 (H) inch
• Weight: 330 g +/-2% , 0.73 lbs +/- 2